Sign In | Join Free | My himfr.com
himfr.com

Fangyu(shanghai)Automation Technology Co.,Ltd

fangyu(shanghai)automation technology co.,ltd

Active Member

3 Years

Home > Robot Plug >

IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

    Buy cheap IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector from wholesalers
     
    Buy cheap IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector from wholesalers
    • Buy cheap IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector from wholesalers

    IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

    Ask Lasest Price
    Brand Name : FANGYU
    Price : Price negotiable
    Delivery Time : 7-10 days
    Payment Terms : TT
    Supply Ability : goods in stock
    Model Number : YS-BH-8F YS-IL-8M
    • Product Details
    • Company Profile

    IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

    Rovmaker Pluggable Wet Cable Wire Robot Subsea Connectors IP68 Ip69 of Underwater Plug and Underwater Socket

    Product Description

    Specification
    STRUCTURE
    MATERIALS AND SPECIFICATIONS
    Main
    The seawater corrodes stainless steel
    Install screw
    7/16-20 UNF thread length is 15/19mm
    Socket head
    Neoprene (special mixing rubber for underwater connector)
    Contact Pin
    Gold-plated copper alloy, American standard pin
    Positioning pin
    303 stainless steel (2 needle Ø 3.2, 3/4 needle Ø 2, 5/6/8 needle don't need)
    O-rings
    Nitrile rubber, the imported o-rings, parker 2-014, Ø 12.42 x 1.78
    Locking lid
    Polyformaldehyde resin (POM)
    Cable plug body
    Special polyether
    Install line
    Teflflon, silver-plated pure copper.
    End cap
    Neoprene (special mixing rubber for underwater connector)
    Cable plug
    Pressure-resistant seawater special cable.

    TECHNICAL PERFORMANCE

    ITEM
    RATING VALUE
    Depth
    0~1000 meters
    Voltage
    300V (resistance to voltage is greater than 1500V 60s)
    Working current
    2A~16A
    Insulation resistance
    > 1000 m Ω (room temperature)
    Wet insertion frequency
    > 500 times
    Working temperature
    (-4~60)°C

    FY Can provide complete robot pre-sales, in sales, and after-sales services
    Leading technology, meticulous management, honest service, and customer first

    At present, the company produces dozens of series and thousands of specifications of products, providing customers with a wealth of products. The company has passed ISO9001 quality management system certification, most products have passed CE certification, and all products meet ROHS environmental protection requirements.

    PRECAUTIONS

    Always apply grease before mating.

    * Disconnect by pulling straight, not at an angle.
    * Do not pull on the cable and avoid sharp bends at cable entry.
    * When using a bulkhead connector, ensure that there are no angular loads.
    * All kinds of connectors should not be exposed to extended periods of heat or direct sunlight.
    Greasing and mating above water (dry mate) :
    * Connectors must be greased with Molykote 44 Medium(recommended brand) before every mating.
    * A layer of grease corresponding to a minimum 1/10 of socket depth should be applied to the female connector.
    * The inner edge of all sockets should be completely covered, and a thin transparent layer of grease left visible on the face of the connector.
    * After greasing, fully mate the male and female connector in order to secure optimal distribution of grease on pins and in sockets.
    * To confirm that grease has been sufficiently applied, de-mate, and check for grease on every male pin. Then re-mate the connector.
    Greasing and mating underwater (wet mate) :
    * Connectors must be greased with Molykote 44 Medium(recommended brand) before every mating.
    * A layer of grease corresponding to approximately 1/3 of socket depth should be applied to the female connector.
    * All sockets should be completely sealed, and a transparent layer of grease left visible on the face of the connector.
    * After greasing, fully mate the male and female connector and remove any excess grease from the connector joint.

    Cleaning

    * General cleaning and removal of any accumulated sand or mud on a connector should be performed using spray based contact cleaner (isopropyl alcohol).

    * New grease must be applied again prior to mating.

    Use of Loctite

    For locking metallic connectors, the use of Loctite 243 is recommended.
    INSTALLATION REQUIREMENTS

    1. End surface roughness requirements Ra1.6 in the diameter of the screw hole around 25mm when threaded hole installation.

    2. Hole diameter should be between Ø 11.2 ~ Ø11.4 mm and roughness requires Ra1.6 in the diameter of the screw hole around 25mm when through-hole installation.
    3. Before installing, make sure to apply a thin layer of silicone oil to the o-ring, not too thick.
    Product Tags:

    IP69 Robot Plug

      

    IP68 Robot Plug

      

    Wire robot connector

      
    Quality IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector for sale

    IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Fangyu(shanghai)Automation Technology Co.,Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Find Similar Products By Category:
    Manufacturing & Processing Machinery
    Hot Searches:

    Friendly Links: www.everychina.com

    Home| Products| Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2025 himfr.com. All rights reserved.

    北京环球广贸软件技术有限责任公司